3D Print

Spray Equipment Storage

Spring Shop Storage challenge 2021

This was a quick video entry for the wood fathers Aussie #springshopestorage challenge 2021.

I made these 3D printed upgrades to improve the storage of my spray gun and tooling. If you want to make some for yourself the .stl files are here:

If you’re just after some basic dimensions here they are:

NOTE: Not all …

Blum Mounting Plate Jig

Blum Drilling Template For CLIP Cruciform Mounting Plates 65.5070

Over the years I have used a Blum Mounting plate jig for most of my cabinet doors.

This jig is perfect for most applications but unfortunately it wont work with inset doors.

So I decided to design my own jig and 3D print it.

This jig is designed to work with the Blum drill and collar setup do its very easy to swap between the two.

The Jigs are very easy to use, mark a center line on the cabinet

Hole and Chamfer Gauge

Attached is the STL for a simple hole and chamfer gauge.

Theres been a lot of interest in this STL so I thought it best to share it here rather than just email it to people interested in printing one for themselves.

This idea behind this guage is help you quickly determine the hole and chamfer sizes for any hardware youre looking at incorporating in your 3D printed projects.

By printing this on your own printer it will also take …

MiniMax Chuck Guard

The guard on my morticer chuck broke. It’s about 12 Years old so the plastic had deteriorated and became brittle over time.

Running the machine without the guard would have been too dangerous for my liking. The jointer function of the machine would have been asking for an accident. It’s the last thing I want to have my fingers near when it’s spinning at a couple of thousand RPM.

My enquiries to the local suppliers didn’t go anywhere so I …