Skip to content

Auriou Rasps

 

With a Birthday on the way and some cabriole legs on the cards for a future project. I lashed out and invested in some new Auriou Rasps.

If you’re not familiar with Auriou, there is a great clip on youtube showing the manufacturing process.

https://www.youtube.com/watch?v=gvr2nZeAfNc


I ordered 3 rasps all 12inch in length,  3 grain, 8 grain and 12 grain. 3 grain being the roughest and the 12 grain the finest.
Sample Mirror




















The rasps arrived in record time and very well packaged. Another bonus when buying from Lie Nielsen is that they include their own handles which complement these rasps very well.

I did a quick test cut, on some scrap Melunak. I was very pleased with the speed and quality of cut. These photos show a comparison between the various grains and the result after 10 strokes.

Sample Mirror

 










I was surprised and how similar they were in speed of cut. The main difference was with the size of the tooth marks left behind.

Sample Mirror







Now onto a real project, shaping a cabriole leg. When shaping a leg, I try to do as much as possible with a spokeshave, but when fairing to the edge of the leg only rasp will get into those tight spaces.

I found the 12 grain did the job perfectly, the rougher grains simply took too much off and would have been ok if I started the process with them instead of the spokeshave.

Sample Mirror

 






















The finish of the 12 grain is very good, but I am seriously considered adding the 6 inch 15 grain to my arsenal to reduce the sanding stage as much as possible…

VALUE Rating: ★★★½☆

BUILD QUALITY Rating: ★★★★★

OVERALL Rating: ★★★★☆

 

Leave a Reply

Your email address will not be published. Required fields are marked *